Heat Stress in Dairy Cows: THI, Signs and Cooling

Dairy cows begin to lose milk when the temperature-humidity index (THI) passes about 68, and the stress becomes severe from about 80. THI combines air temperature and humidity into one number, because a hot, humid day stresses a cow far more than a hot, dry one. In many Indian summers, an afternoon at 35 degrees C and 50 per cent humidity works out to a THI of about 85, which is well into the severe band. This guide shows how to calculate THI, what it does to the cow, and the cooling measures that research shows actually pay off.

Written for dairy farmers and students. You can also use our live heat stress alert (THI calculator). Hindi and Gujarati versions: Hindi and Gujarati.

What is THI, and how do you work it out?

A cow gets rid of heat mainly by breathing and sweating, and humid air makes both less effective. THI is the standard way to combine the two numbers. The usual formula uses temperature in degrees Fahrenheit (F):

THI = T − (0.55 − 0.0055 × RH) × (T − 58), where T is the air temperature in °F and RH is the relative humidity in per cent. To use degrees Celsius, first convert: F = (1.8 × C) + 32.

Shed conditionsIn °FTHIBand
25 °C and 50% humidity77 °Fabout 72Mild stress
28 °C and 40% humidity82 °Fabout 74Moderate stress
30 °C and 60% humidity86 °Fabout 80Severe stress begins
35 °C and 50% humidity95 °Fabout 85Severe stress
40 °C and 30% humidity104 °Fabout 86Severe stress

Check one yourself: 35 °C is 95 °F. At 50 per cent humidity, (0.55 − 0.275) = 0.275, and (95 − 58) = 37, so THI = 95 − (0.275 × 37) = 95 − 10.2 = about 85. A thermometer and a humidity meter hung in the shed at cow height give you the two inputs.

Scale of the temperature-humidity index (THI) from 60 to 98 in four bands: no stress below 68, mild 68 to 72, moderate 72 to 79 and severe 80 and above, with five example conditions: 25 C and 50 per cent humidity gives THI 72, 28 C and 40 per cent gives 74, 30 C and 60 per cent gives 80, 35 C and 50 per cent gives 85, and 40 C and 30 per cent gives 86
A hot afternoon in much of India falls in the moderate or severe band. Chart by Dr. Rameez Bloch, DrblochVet.com (bands from extension studies of high-yielding cows).

The stress bands

THIStress levelWhat you see in the cow
Below 68NoneNormal breathing of about 40 to 60 breaths a minute; body temperature about 38.6 to 39.2 °C
68 to 72MildSeeks shade; breathing rises to about 60 to 75; milk starts to fall slightly
72 to 79ModerateBreathing about 75 to 85; body temperature about 39.4 to 40 °C; drinks more, eats less, milk and fertility fall
80 to 89SevereOpen-mouth panting, drooling, a sharp drop in milk, high risk of collapse

Older research put the point where milk starts to fall at a THI of 72. More recent work on high-yielding cows places it nearer 68, which is a temperature of about 22 °C at 45 per cent humidity. Note that the research behind these bands comes from high-yielding cows in temperate countries. Indigenous breeds and buffaloes may tolerate heat differently, so use the bands as a guide and let your own cows’ breathing tell you the rest.

What heat does to the cow and the dairy

  • Less feed eaten and less milk. Cows eat less to reduce the heat of digestion. Milk can fall by up to half in the worst cases, and early-lactation, high-yielding cows are hit hardest. Only about half of the milk loss is explained by the lower feed intake; the rest is the direct effect of the heat.
  • Poorer fertility. Pregnancy rates fall and the days open increase. Heat also hides the signs of heat (see when to inseminate a cow).
  • More disease. Heat-stressed cows have higher somatic cell counts, more clinical mastitis (see mastitis), more lameness and more deaths.
  • Weaker calves. Heat stress before calving lowers the antibody level in the colostrum (see colostrum for calves), and it also affects dry cows.

Cooling measures that research supports

MeasureWhat the studies foundHow to do it
Shade10 to 20% more milk in shaded cows than in unshaded cowsShade for milking cows, dry cows and heifers, with good airflow underneath
Fans plus sprinklersAbout 11% more milk than shade aloneSprinkle (do not mist) to wet the cow’s body, then use fans to evaporate it; place them over the feed bunk so that it is the coolest place on the farm
Fan settingSwitch on at THI 68Point high-speed fans slightly downward (about 20 degrees) so air blows past the cows; automate them with a thermostat or humidity sensor
Cool, clean waterCows drink up to 50% more when stressed; chilled drinking water (about 10 °C) lowered stress and raised intake and milkPlenty of water points, scrubbed often, shaded, with enough flow for several cows to drink at once

Feeding in hot weather

Because the cow eats less, each mouthful has to carry more nutrients, so the ration needs to be balanced for the lower intake rather than for the normal intake (see how to balance a dairy ration). Keep feed fresh and clean, because feed spoils faster in heat, and make sure there is always more water than the cows will drink.

When to act: a quick check you can do

Count breaths for 30 seconds on a few cows lying quietly and double the number. If breathing is above 100 breaths a minute in more than half of the cows, take immediate action: add cooling, water and shade now. An individual cow that is open-mouth panting, drooling, down, or showing a high temperature needs a veterinarian the same day.

Frequently asked questions

At what THI should I start cooling?

Extension specialists recommend starting fans at a THI of about 68, because high-yielding cows already lose milk from there. Do not wait for obvious panting.

Does heat stress affect buffaloes too?

Yes, buffaloes are well known to suffer in the heat and need water for wallowing or sprinkling and shade, though the exact THI thresholds in the published bands come from cows. Ask your dairy cooperative or vet for local guidance.

Is misting a good idea?

Extension guidance says to sprinkle large droplets to wet the cow’s body and then use fans to evaporate the water. A fine mist alone adds humidity without wetting the skin and is much less effective.

How can I tell whether my cooling is working?

Count breaths before and after cooling, and watch feed intake and milk yield over the following days. Falling breathing rates and steady intake are good signs.

Sources and further reading

Reviewed by Dr. Rameez Bloch, BVSc & AH, MVSc (Gujarat Veterinary Council Reg. 3570). Last reviewed: November 2026. For education only. The thresholds come mainly from studies of high-yielding cows in temperate regions; use them as a guide and confirm with your veterinarian or dairy cooperative.