Milk Cost per Litre and Least-Cost Ration Planner (Cow and Buffalo, India)

Feed is 60 to 70 per cent of what it costs to produce milk in India, yet most dairy farmers decide how much cake and compound feed to give by habit, not by calculation. The result is common: one animal gets far more protein than it needs while another runs short of energy or minerals. Both lose money.

This free planner works out what your cow or buffalo actually needs each day, then finds the cheapest mix of your own feeds at your own prices that meets it. It also tells you what each litre of milk costs you in feed and how much you could save compared with what you feed today. It runs fully in your browser and saves your feeds and prices on your phone.

Free farm tool · ICAR / NRC based
Milk Cost per Litre and Least-Cost Ration Planner

For crossbred cows, desi cows and buffalo in India. Enter your animal, the feeds you have and today’s prices. The tool balances energy, protein, calcium and phosphorus at the lowest cost and tells you what each litre of milk costs you in feed.

1Your animal

Daily requirement for maintenance + milk (fat-corrected) + pregnancy, estimated with ICAR (2013) / NRC-style factorial equations. DM = dry matter, TDN = total digestible nutrients (energy), CP = crude protein.

2Feeds you have and today’s price

Tap to add or remove common feeds. Prices are example Indian market rates per kg as fed; change them to what you actually pay (for home-grown fodder, use its cost of production). Min/Max are kg per day. “Now feeding” is optional: fill it to check your current ration and see your savings.

Feed values are typical book values (Feedipedia, NRC, ICAR, BIS minimums); your feeds may differ. Requirements are estimates. Balance your ration with your local veterinarian, dairy cooperative or NDDB Ration Balancing Programme (RBP) Local Resource Person before major changes, and change feeds gradually over 7–10 days. Educational tool by Dr. Rameez Bloch. It does not replace examination by a registered veterinarian.

How to use the planner

  1. Describe the animal. Choose crossbred cow, indigenous cow or buffalo, then enter body weight, today’s milk yield and fat percentage (from your dairy cooperative slip). Pick the lactation number and, if she is pregnant, the month. The green boxes show her daily requirement at once.
  2. Set two practical limits. “Max green fodder” is how much green fodder or silage you can actually give per animal each day. “Minimum roughage” keeps the ration safe for the rumen; 50% of dry matter suits most animals, 40% only for high yielders on good management.
  3. List your feeds. Tap the common feeds you have (green maize, berseem, bhusa, cakes, compound feed, mineral mixture, salt) and remove the ones you do not. More feeds are in the library drop-down, and you can add your own feed with its analysis.
  4. Type today’s price per kg as fed. The example prices are only a starting point. For home-grown fodder use its cost of production, not zero, or the planner will treat it as free.
  5. Set Min and Max where needed. For example, keep mustard cake to 1.5 kg, keep mineral mixture at 50 to 150 g, or force at least 3 kg of straw you already have in stock.
  6. Optional: fill “Now feeding”. Enter what you give today. The “Check my current ration” tab shows deficits and excesses, and the least-cost tab shows your saving per day, per month and per lactation.
  7. Read the result. You get kg per feed per day, feed cost per day and per litre, nutrient bars against requirement and a feeding timetable. Print it, save it as PDF or send it on WhatsApp to whoever feeds the animals.

How ration balancing cuts feed cost

A balanced ration is not the richest ration. It is the one that supplies just enough energy, protein, calcium and phosphorus for the milk the animal is producing, within the amount of dry matter she can eat, from the cheapest combination of feeds available. Three things usually save the most money:

  • Cutting surplus protein. Oilseed cakes and high-protein compound feed are the costliest items in the ration. Protein fed above requirement is not turned into extra milk; the rumen converts it to ammonia and the animal excretes it as urea, which also costs energy and can lower fertility.
  • Using fodder fully. Good green fodder, especially legumes such as berseem and lucerne, supplies protein and energy far more cheaply than concentrate. Every kilogram of concentrate replaced by well-grown fodder lowers the cost per litre.
  • Correcting minerals. A few rupees of area-specific mineral mixture a day prevents the much larger losses of repeat breeding, delayed heat and milk fever.

India’s National Dairy Development Board runs a Ration Balancing Programme (RBP) in which trained Local Resource Persons balance rations for farmers with software. The approach in this planner is the same in principle. NDDB has reported that balanced feeding typically reduces feed cost per kg of milk and can improve milk yield and fat; the size of the saving depends on how unbalanced the original ration was.

The science behind the numbers

The requirement is built factorially, as in ICAR (2013) Nutrient Requirements of Cattle and Buffalo and the NRC system: maintenance plus milk plus pregnancy.

  • Maintenance is scaled to metabolic body weight (body weight0.75): about 0.0355 kg TDN and 3.55 g crude protein per kg0.75, plus 0.04 g calcium and 0.028 g phosphorus per kg body weight. First- and second-lactation animals that are still growing get 20% and 10% more energy and protein.
  • Milk requirement rises with fat percentage, because fat carries most of milk’s energy. Per kg of milk the planner allows 0.154 + 0.042 × fat% kg TDN and 42 + 12 × fat% g crude protein, which gives about 0.32 kg TDN and 90 g CP for 4% cow milk and 0.45 kg TDN and 126 g CP for 7% buffalo milk, with matching calcium and phosphorus.
  • Pregnancy in the 7th, 8th and 9th month adds a commonly used allowance of about 15%, 25% and 35% of maintenance energy and protein, and more calcium and phosphorus, because most foetal growth happens in the last trimester.
  • Dry matter intake is estimated from 4% fat-corrected milk (FCM = milk × (0.4 + 0.15 × fat%)) and metabolic weight, and the planner keeps intake within ±10% of that estimate so the ration is neither too bulky nor too little.

Feed values (dry matter, CP, TDN, calcium, phosphorus) are typical book values for Indian feeds. Compound cattle feed uses the BIS minimum values for Type I (22% CP, 70% TDN) and Type II (20% CP, 65% TDN). Digestible crude protein, used in older Indian standards, is estimated from CP for reference.

The least-cost mix is found by linear programming, the same method used by feed mills. The planner minimises total cost subject to dry matter limits, TDN, CP, calcium and phosphorus at or above requirement, roughage share, green fodder limit and your Min/Max for each feed. If your feeds cannot meet a requirement, it shows the shortfall and tells you what kind of feed to add rather than giving a wrong answer.

Worked example: a 10-litre crossbred cow

A 400 kg HF crossbred cow in her third lactation gives 10 litres a day at 4% fat. She needs about 11.1 to 13.6 kg dry matter, 6.4 kg TDN, 1,218 g crude protein, 48 g calcium and 31 g phosphorus a day.

Her owner feeds 20 kg green maize, 6 kg wheat bhusa, 5 kg Type II compound feed, 1 kg cottonseed cake and 30 g salt. At the example prices that costs ₹278 a day, or ₹27.83 per litre. The check shows why: she receives 134% of her energy and 139% of her protein requirement and more dry matter than she can eat, and she gets no mineral mixture.

With the same farm’s feeds and a 30 kg green fodder limit, the planner suggests 25 kg green maize, 5 kg berseem, 3.9 kg bhusa, 1.4 kg mustard cake, 50 g mineral mixture and 30 g salt. Every requirement is met, roughage stays well above 50%, and the cost falls to about ₹171 a day, or ₹17.08 per litre: a saving of roughly ₹108 a day, ₹3,200 a month and ₹32,000 over a 305-day lactation. Your own numbers will differ with your prices, but the pattern of surplus concentrate is very common.

If her yield rises to 15 litres, change the yield box and the planner will add grain or compound feed as needed. Recheck the ration whenever yield, fodder supply or prices change.

Frequently asked questions

Why does the planner give so little concentrate?

Because good green fodder already supplies much of the energy and protein a moderate yielder needs. Concentrate rises automatically when yield is higher, when green fodder is limited or when your fodder is poor (straw-based rations). If you give more than the plan, the extra mostly becomes cost, not milk.

Why is my home-grown fodder not free?

Fodder you grow costs seed, fertiliser, irrigation, labour and the land’s alternative use. Enter its cost of production per kg; otherwise the planner will overuse it and the cost per litre will look lower than it really is.

Is the feed cost per litre the same as my cost of milk production?

No. It covers feed only. Labour, veterinary care, breeding, housing, interest and the cost of feeding dry animals and heifers come on top. Feed is still the largest single item, so it is the best place to start.

Can I feed this ration to a dry or pregnant animal?

Set milk yield to 0 and choose the pregnancy month for a dry pregnant animal. In the last 2 to 3 weeks before calving, many vets use a special close-up ration and limit calcium-rich legumes to reduce milk fever risk, so discuss that period with your veterinarian.

Why is mineral mixture always included?

Indian fodders are often short of phosphorus and trace minerals such as zinc, copper and manganese. Area-specific mineral mixture at 50 to 100 g a day is one of the cheapest ways to improve fertility and prevent milk fever, so the planner keeps at least 50 g in the ration.

How accurate are the feed values?

They are typical values. Real feeds vary with variety, season, cutting stage and processing. If you have a laboratory report for your feed, open “Composition” under that feed and enter your own figures.

What if the planner says a nutrient is short?

It means your feeds and limits cannot meet that requirement. Add a feed that supplies it (an oilseed cake for protein, maize grain or compound feed for energy, mineral mixture for calcium and phosphorus) or raise its maximum.

Important note

This planner gives estimates based on typical feed values and standard requirement equations. It is meant to help you understand and plan feeding, not to replace professional advice. Before making big changes, balance your ration with your local veterinarian, dairy cooperative or the NDDB Ration Balancing Programme, and change any ration gradually over 7 to 10 days. Sick, very high-yielding or freshly calved animals need individual attention. Educational tool by Dr. Rameez Bloch. It does not replace examination by a registered veterinarian.

By Dr. Rameez Bloch, BVSc & AH, MVSc (Animal Nutrition), Gujarat Veterinary Council Reg. 3570.