Balancing a Dairy Ration by Hand: The Pearson Square Explained Step by Step

Every animal nutrition student meets the Pearson square in the first few weeks. It looks like a trick: draw a box, write some numbers in the corners, subtract diagonally, and a feed mixture appears. Because it feels like magic, many students never really understand it, and then forget it before the exam. This guide explains what the square is actually doing, works through an example, and shows where it stops being useful. You can check your answers with the ruminant ration evaluator.

What problem does it solve?

Imagine you have two feeds. One is low in protein, say a wheat straw or maize stover. The other is high in protein, such as a groundnut cake or a commercial concentrate. You need a mixture that has a specific protein percentage in between. The Pearson square tells you in what proportion to mix them. It is simply a quick way of solving a weighted average.

Why the subtraction works

Put the target protein in the middle of the square. Put the two feed protein values on the left, one above the other. For each feed, subtract its value from the target and ignore the sign: that gives you the difference on the opposite diagonal. Those two differences are the number of parts of each feed. The logic is that the feed far from the target needs less weight to pull the mixture towards the target, and the feed close to the target needs more. The parts are then converted to percentages by dividing each by the total.

Diagram of the Pearson square: corn at 9 per cent crude protein and soybean meal at 44 per cent are placed on the left corners, the 16 per cent target in the centre, and the differences on the right give 28 parts corn and 7 parts soybean meal, which is 80 per cent corn and 20 per cent soybean meal
Put the target in the centre, subtract diagonally and ignore the sign. Diagram by Dr. Rameez Bloch, DrblochVet.com.

Worked example

You want a 12 percent crude protein mixture (on a dry matter basis) from a roughage with 6 percent crude protein and a concentrate with 22 percent.

  1. Parts of roughage = |22 − 12| = 10.
  2. Parts of concentrate = |12 − 6| = 6.
  3. Total parts = 16. Roughage = 10 ÷ 16 = 62.5 percent; concentrate = 6 ÷ 16 = 37.5 percent, both on a dry matter basis.
  4. Check: 0.625 × 6 + 0.375 × 22 = 3.75 + 8.25 = 12. Correct.

Now make it practical. Suppose a 400 kg animal eats about 2.5 percent of its body weight as dry matter, which is 10 kg DM per day. Roughage supplies 6.25 kg DM and concentrate 3.75 kg DM. Both feeds are about 90 percent dry matter, so the as-fed amounts are about 6.9 kg of roughage and 4.2 kg of concentrate. Farmers think in as-fed kilograms, so this last step matters.

More than two feeds: the mixing trick

The square only takes two inputs, so for more feeds you first combine feeds into two groups, work out each group’s protein, and then run the square on the two groups. The extension method uses this example: make a 15 per cent crude protein mix from a supplement of 60 per cent soybean meal and 40 per cent corn gluten meal (both 45 per cent protein) and a grain mix of 65 per cent corn (9 per cent protein) and 35 per cent oats (12 per cent protein).

  1. Protein of each group. Supplement: 0.60 x 45 + 0.40 x 45 = 45 per cent. Grain mix: 0.65 x 9 + 0.35 x 12 = 5.85 + 4.2 = 10.05 per cent.
  2. Run the square on the two groups. Supplement parts = |15 – 10.05| = 4.95. Grain mix parts = |45 – 15| = 30. Total = 34.95 parts.
  3. Convert to percentages. Supplement = 4.95 / 34.95 = 14.2 per cent. Grain mix = 30 / 34.95 = 85.8 per cent.
  4. Split each group back into its feeds. Soybean meal = 0.60 x 14.2 = 8.5 per cent; corn gluten meal = 0.40 x 14.2 = 5.7 per cent; corn = 0.65 x 85.8 = 55.8 per cent; oats = 0.35 x 85.8 = 30.0 per cent.
  5. Check. 0.558 x 9 + 0.300 x 12 + 0.085 x 45 + 0.057 x 45 = 5.02 + 3.60 + 3.83 + 2.57 = 15.0 per cent. Correct.

A rule that catches many students. The target has to lie between the two values on the left. If you try to reach 14 per cent protein with barley (12 per cent) and corn (10 per cent), the square gives a negative number, because both feeds are below the target: no mixture of the two can reach it. You would need a feed above 14 per cent, such as a protein supplement.

The common mistake: mixing up dry matter and as-fed

Green fodder is 75 to 85 percent water, and straw is about 90 percent dry matter. If you use as-fed protein values for green fodder, the answer will be wrong because water dilutes the protein. Always convert to dry matter first, balance, and then convert back to as-fed weights at the end. This is exactly the type of error examiners like to test.

What the Pearson square cannot do

  • It balances one nutrient only. Protein can be right while energy, calcium, phosphorus or fibre are wrong.
  • It uses only two feeds. Real rations often include three or more. For more feeds, you combine some into a mixture first, or use trial and error or software.
  • It ignores protein quality. Rumen degradable and bypass protein, and amino acid supply, are not captured by crude protein.
  • The target has to lie between the two feeds. If you want 12 percent and both feeds are below it, no mixture of the two will reach it.

For a dairy animal, requirement depends on body weight, milk yield and fat, stage of lactation and pregnancy. Standards such as the ICAR feeding standards and NRC publications give the requirement tables. The square only helps you reach a number once you know the number you are aiming for. To work out feed cost per litre of milk, try the milk cost and least-cost ration planner.

Frequently asked questions

Can I use the Pearson square for energy?

Yes, the same arithmetic works for any single nutrient expressed as a percentage or concentration, but you can only balance one nutrient at a time.

Which protein value should I use, crude or digestible?

Use the same kind of value for both feeds and for the target. Many Indian exam problems use crude protein or digestible crude protein, so follow what the question states.

Is hand balancing still worth learning when software exists?

Yes. It builds the intuition to notice when a software answer looks wrong, and it is a staple of university exams and field work where no computer is available.

Sources and further reading

For education. Feed requirements vary with species, stage and production, so confirm rations with your nutritionist or veterinarian. Written and reviewed by Dr. Rameez Bloch, BVSc & AH, MVSc (Gujarat Veterinary Council Reg. 3570). Last reviewed: November 2026.