Inseminate a cow about 12 hours after you first see her in standing heat: a cow first seen standing in the morning is inseminated that evening, and a cow first seen standing in the evening is inseminated the next morning (the AM-PM rule). Standing heat lasts roughly 12 to 18 hours, and the cow ovulates about 24 to 32 hours after it begins, so insemination 4 to 14 hours after the start of standing heat gives the sperm time to reach the egg. The hard part is not the rule but spotting the start of heat, which is the most limiting factor in artificial insemination (AI) programmes.
Written for dairy farmers, AI workers and BVSc students. It is educational and does not replace the advice of your veterinarian or AI technician.
Standing heat is the sign that counts
A cow shows many signs around heat, but only one is truly reliable: standing still to be mounted by other cows (standing heat). Everything else is supporting evidence. Use the other signs to decide which cows to watch closely.
| What you see | What it usually means |
|---|---|
| Stands still when other cows mount her | She is in standing heat now; this is the sign that sets the clock for insemination |
| Mounts other cows but does not stand when mounted | Early heat, or heat that is ending; watch her closely for the next 12 hours |
| Clear, stringy mucus from the vulva; swollen vulva | Approaching or in heat |
| Restless, bellowing, ears and head alert, follows other cows, head raised with a curled lip | Heat behaviour (secondary signs) |
| Drop in appetite or milk for the day | A common but non-specific sign |
| Blood-stained mucus from the vulva | Heat has already ended (bleeding after heat); the next heat is expected in about 19 days |
The timeline from heat to ovulation
- Early heat: about 6 to 24 hours. The cow does not yet stand when mounted, but mounts others and seeks company.
- Standing heat: about 6 to 18 hours, typically 12 to 18. This is the window when she stands.
- Late heat: about 12 to 24 hours, with restless behaviour but no standing.
- Ovulation: about 24 to 32 hours after standing heat begins (an average of about 27 to 28 hours), with variation of several hours between cows.
- How long things stay fertile: sperm survive for about 24 to 30 hours in the cow, but the egg stays fertile for only about 8 to 10 hours after ovulation. So the sperm need to be waiting when the egg arrives.

The AM-PM rule, step by step
- Watch the herd at least twice a day, about 12 hours apart.
- Note the time you first see a cow standing.
- If it was in the morning, inseminate her that evening. If it was in the evening, inseminate her the next morning.
- If she is still standing after the insemination, ask your AI worker whether to inseminate again about 12 hours later.
Inseminating about 12 hours after you first see standing heat means breeding at roughly 18 hours after heat actually began, which is about 6 to 12 hours before ovulation. That puts fresh sperm in the oviduct when the egg is released. Research also shows that very early insemination (around the start of heat) and late insemination (20 or more hours after it began) both lower conception rates.
What if I can only check once a day?
Some studies have found no difference in conception between the AM-PM rule and a simple once-a-day schedule in which cows seen in heat in the morning are bred that morning and cows seen in the afternoon are bred the next morning. Even so, you still need to watch for heat at least twice a day, because the rule only works if you catch the start. Sexed semen is more sensitive to timing, and breeders usually wait another 4 to 6 hours after the normal time; ask your AI worker.
How to find heat reliably
- Look at least twice a day, about 12 hours apart, away from feeding and milking when the cows are free to behave naturally. Early morning is best in hot weather, because high temperatures suppress mounting.
- Use tail paint or chalk on the tail head: a rubbed-off mark shows a cow has been mounted. Re-apply it weekly.
- Keep records. Write down the date of every heat and every insemination. With a cycle of about 21 days, you can predict the next heat and watch for it. Secondary signs can show up to 40 hours before and 20 hours after the start of heat, so the record helps you spot the pattern.
- Watch for a cow that returns to heat. Check the cow again at about 3 weeks and 6 weeks after insemination. If she comes back in heat, tell your AI worker so that you do not lose another cycle.
After insemination
- A cow that does not come back into heat is probably pregnant, but this should be confirmed. A veterinarian can pregnancy-test about 6 to 8 weeks after insemination.
- A cow with no signs of heat at all needs a veterinary check: she may be pregnant, may not be cycling, or may have a “silent” heat, in which she ovulates normally but shows no behaviour.
- A cow that has been inseminated several times without success is a repeat breeder and should be examined by a vet for infection, ovulation problems or poor timing.
Heat, weather and the Indian dairy farm
Hot weather makes heat harder to see, because cows mount less in the heat of the day, and the stress also lowers fertility. In summer, watch earlier in the morning and later in the evening, give shade and cool water, and read our guide to heat stress in dairy cows. Heat behaviour and its length can differ between crossbred cows, indigenous cows and buffaloes, so ask your AI worker or vet what pattern you should expect in your own herd. Good nutrition matters too: see how to balance a dairy ration.
Frequently asked questions
How long does heat last in a cow?
Standing heat typically lasts 12 to 18 hours, and in individual cows it can be as short as 6 or as long as 24 hours. The whole cycle from one heat to the next is about 21 days.
When is the best time to inseminate?
About 12 hours after you first see standing heat, which is roughly 12 to 24 hours before ovulation. Highest conception is reported when cows are bred about 4 to 14 hours after the start of heat.
Why is the standing sign more reliable than discharge or bellowing?
Mucus, restlessness and bellowing also occur before and after standing heat and in cows that are not about to ovulate. Standing to be mounted is the behaviour that is closely tied to the time of ovulation.
What is silent heat?
It is a cycle in which the cow ovulates normally but shows no external signs of heat. It is a common reason why heat is missed, and it is why records, tail paint and, in some herds, activity monitors are useful.
Sources and further reading
- Western Canadian Dairy Seminar, University of Alberta: Techniques to maximize conception rates (the timing of ovulation after the onset of heat, the AM-PM rule and the effect of improper timing).
- University of Georgia Extension, Bulletin 1212: Heat detection strategies for dairy cattle (best conception 4 to 14 hours after the onset of heat; once-a-day breeding studies).
- CGIAR / ILRI: Reproduction and breeding management for dairy farmers (stages of heat, tail marking, returns to heat and pregnancy checks).
- Beef Magazine (Oklahoma State University specialist): Heat detection and timing of artificial insemination (signs of heat, ovulation and sperm and egg life, and sexed semen).
- Ag Proud: Timing of insemination: achieve optimal conception by working the averages (average interval from the start of heat to ovulation).
Reviewed by Dr. Rameez Bloch, BVSc & AH, MVSc (Gujarat Veterinary Council Reg. 3570). Last reviewed: November 2026. For education only. Timings are averages from published studies; follow your AI technician’s and veterinarian’s advice for your own herd and semen type.